Wednesday, November 30, 2011

Tutorial: The easiest Christmas Stocking you’ll ever make

Recently, our mom’s group stitched up some super easy stockings for Craft Hope Project # 14, Christmas in Dixie, which sent stockings and other Christmas decorations to tornado victims in the South. When we decided to participate in this project, I had the perfect stocking pattern in mind…but it needed a bit of tweaking. So I give you…..The easiest Christmas Stocking you will EVER make!
 
IMGP3029

This pattern originally came from the Bernina USA website, circa 2004-ish. My Kansas hometown fabric store, where I learned to sew AND worked for around 7 years off and on during high school and college, taught sewing and machine embroidery classes. This stocking was one of those classes and was taught by my friend and coworker, Serena. She upgraded Bernina’s pattern into a lovely embroidery project, complete with a soft batting layer, that was constructed of shiny satin or warm wool. In fact, our family stockings are made using the original pattern. Aren’t they cute?

IMGP5968

I deconstructed the pattern a bit for this project, because most of our mom’s group seamstresses are beginners

Here’s how to do it:

Supplies

*Note: The following fabric measurements give you enough to do TWO stockings. I use this measurement to compensate for any design directionality (one-way Santa print, for example). If you’d rather not purchase that much, just take the pattern with you to the store and get exactly what you need*

1/2 yd of outside fabric (cute Christmas print, etc) can be cotton, felt, anything really that is easy to work with.

3/4 yd lining/contrast (plain color that goes with your outside fabric) If using felt, you really don’t need a lining, so you’ll just want to buy enough contrast for the toes, heels, cuff and hanger.

Thread

Spray Adhesive (optional)

Cut List

For the Stocking body: Cut, using these stocking bottom and stocking top patterns, 2 bodies from outside fabric and 2 bodies from lining fabric

For the Heel and Toe: Cut, using this pattern, 2 heels and 2 toes from contrast fabric

For the Cuff: Cut one 8” x 15” rectangle from the contrast fabric

For the Hanger: Cut one 1.5” x 5” rectangle from the contrast fabric

 IMGP3025

Your first step is to satin stitch the heels and toes onto the outside stocking body pieces. Spray the wrong sides of all toes and heels lightly with spray adhesive. Stick them in place to the right sides of both outside stocking pieces. Satin stitch, on the inside edge only, toes and heels to stocking. Satin width approx 3, length 0.5-ish. *Note: If you’d like to interface the heel and toe pieces for more body, feel free to do so…we didn’t just for simplicity sake.

IMGP3032

Now you will lay all your body pieces in the following order, from top to bottom: Outside body pieces on top, right sides together, then lining pieces beneath, right sides together.

IMGP3040 copy

Pin all four layers together…this is where the magic happens. You will only stitch around once, combining all layers and, when you turn the stocking, it will be automatically lined! Brilliant! Stitch around entire stocking, 3/8” seam, leaving the top open.

 IMGP3042 IMGP3046

Next, clip your curves

IMGP3047

Clipping your curves helps with turning. For inside (concave) curves, simply clip straight into the seam allowance, being sure not to clip your stitching. For outside (convex) curves, clip out triangle shapes all the way around the curve, again don’t clip your stitching. This reduces the bulky seam allowance which makes the curve more round and nice.

 IMGP3049 copy

Now the magic happens. To turn the stocking, reach inside the two outside stocking body pieces.

IMGP3055 copy

Grab the toe, inside, and pull it all the way out the top.

IMGP3057 copy

When the stocking is turned right side out, stick your hand back in there and poke out the heel and toe so it looks nice. Observe how the stocking is turned and lined all in one motion! How cool is that?! Give it a quick pressing at this point.

IMGP3058 copy

Next, let’s get the cuff and hanger ready. Take your 8” x 15” cuff piece and fold it in half width wise. Pin the raw edges and stitch across, 3/8” seam.

 cuff 1 cuff 2

After stitching, open up the seam allowance and press open. Then fold the cuff, WRONG sides together, in half length-wise. The right sides should be on the outside and it’ll look like a finished cuff ready for installation.

cuff 3 cuff 4

For the hanger, take your 1/5” x 5” rectangle and fold in 1/4” on each of the long sides. Press.

hanger 1 hanger 2

Fold the hanger in half length-wise, containing the raw edges inside. Top stitch up both sides, making a nice sealed hanger.

hanger 3 hanger 4

Fold the hanger in half and pin it to the INSIDE of the stocking at the heel seam, raw edges together.

IMGP3060

Grab the cuff and place it INSIDE the stocking, over the hanger, and pin it in, raw edges together.

IMGP3061

Now stitch around the top of the stocking, 3/8” seam. You’ll be stitching the cuff on and stitching the hanger in, in one motion.

IMGP3063

Reach in and pull the cuff up and out of the stocking.

IMGP3064

Then fold the cuff over the top, on the outside of the stocking. Your seam allowance is now hidden under the cuff. No need to finish it unless you want to zig-zag the edge. The only reason I would consider finishing that raw edge would be if I plan on washing the stocking often, otherwise You’re DONE!

IMGP3065

How simple was that? You can make them for the whole family in one naptime. So super simple!

 IMGP3066

Our Awesome Austin Moms ended up sending 16 stocking to Christmas in Dixie. They all looked great and I hope they will bring joy to the recipients who lost everything in last summer’s tornadoes.

IMGP3069

Happy Stocking Making!

IMGP3079

signature

8 comments:

  1. I love these! I checked out the templates and then went to the craft store to buy fabric. When I got fome and tried together the templates to print them there was an error.that was yesterday and I am still getting an error today on both my laptop and iPad. Can you help?

    ReplyDelete
  2. Sarah, Thank you for bringing this to my attention. I'm having the same problem! I'm working on it...stand by, please! If you could give me your email address I can send the files that way while I'm working on the problem. Sorry and thanks!

    ReplyDelete
  3. Thanks for getting back to me so quickly! I just had it work on my ipad but when I moved over to my laptop to print it, I got that same error message again. Technology! :) My email address is petersonsarah326@gmail.com Thanks a lot! I'm excited to get started!

    ReplyDelete
  4. Oooh! I got it to work now! No need to email, I have them all printed! Thanks again!

    ReplyDelete
  5. I made these for my entire family out of novelty fabric, each one to fit their personality. Thank you so much for such a wonderful and fascinating way to do a lined stocking.

    ReplyDelete
  6. Here are high quality stocking store for women at www.00701.com.

    ReplyDelete
  7. Epson is an all around the world recognized mainstream brand fabricating different printers from Inkjet to LaserJet and the as of late well known wireless printers of different shapes, size, setup, and so on Epson so far has accomplished the altruism of associating with all frameworks supporting assorted OS and design for an incredible printing experience. Epson printer is an error message In any case, now and again, users think of breaks in their printing heaven. The blunder codes are basically answerable for making bothers in users of the printers. The issue can emerge in any printer be it Injet or wireless. On the off chance that you go over a comparative issue, you can without much of a stretch choose the technical support of Epson or can anticipate figuring out how to fix Epson printer error message.

    ReplyDelete
  8. hello! Not sure if this is still active, but wanted to ask if there is a new link for the patterns. It takes me to a locked GoogleDrive page - Any info you can provide is much appreciated!

    ReplyDelete